If your shower or bath is not correctly sealed, you may have water leaks at these exposed seams. It's easy to seal these leaks with TEC-7 , thereby fixing the
problem and preventing further water damage.
1. Dry out your shower or tub completely. Do not use for at least 2 days. You'll need to use a different bath for these 2 days.
2. Clean the bath and shower surfaces thoroughly, removing any hair, mold or shower scum near the seams you will be sealing.
3. Cut the TEC-7 applicator opening on a 45-degree angle to get the best angle for sealing. Squeeze the TEC-7 evenly into the faulty seams.
4. Remove the excess TEC-7 with your finger while also smoothing the surface. It helps to wet you finger in soapy water to get the best result.
5. Let the TEC-7 dry for 12 hours.
Stainless Steel finnish.
